iMovie is a simple, user-friendly video-editing program which is included free with the Apple operating-system (it has no Windows PC version).
Before you start iMovie, in case you would like to import or capture video off your digital video camera, you first should connect your camera to the pc, therefore imovie for pc will detect the camera and let you start getting video clips.
Despite its simplicity, iMovie offers lots of the exact same features – falling movies on a timeline, popping them, adding transitions between clips, etc. – as more complex video-editing applications like FinalCut Pro or Signature.
Linking the Video Camera to the Computer
To capture movie off your digital camera you should connect it to the pc using a cable – typically a-6 pin to 4 pin Firewire cable.
Firewire is the typical for Apple computers as well as a firewire port is created into every one. It also can be used by Windows Computer computers to do video-capture, although in some cases youare going to need to get a firewire card to fit into an expansion slot in your Computer to create a firewire port.
You join the 6 pin end of the cable to the firewire port in the back of your personal computer. Then join another 4 pin end to the firewire jack in your digital video camera.
It is the port for DV in/out and contains an icon of an I beside it.
Then switch on the cam and place the mini-DV tape where you would like to capture video into the camera.
When you start iMovie it today may discover the camera and permit you to handle playing of your minidv tape using your computer monitor, including selecting clips to capture.
You’ll receive a prompt asking you if you’d like to open an existing project or develop a new one. A job is a document you create on the PC to save the video you record and after that change.
Start iMovie by clicking on the iMovie icon in the Apple menu or pier.
In this event because we’re posting video for the very first time, click Create Project.
Give your job a title and save it on your personal computer’s hard drive or on a portable firewire drive (you need to create a special file in your hard disk to maintain your projects).
The key iMovie display today will show up on your own computer.
The screen is split into three regions:
At the bottom is the Audience. This is really where you are going to organize your videos right into a film by dragging them down from the Shelf area and after that editing them. The viewers got two different display modes:
In the top correct is the Ledge. That is where you’ll store clips you’ve got out of your video camera.
Cut Audience, which shows symbols of each and every clip.
On top left is the Computer Screen. This is where you utilize manage buttons that resemble the controls on a standard VCR to play your videos, whether or not they’re still about the camera, shot onto the Shelf place or pulled into the Audience place.
Timeline Audience, which displays the movies along a horizontal bar that shows you the video and sound tracks for each cut (this is the setting you will usually use for enhancing your movies).You toggle back and forth between both of these opinions utilizing the change to the far-left just over the Audience that has symbols to get a movie cut (Show Viewers) and a time (Timeline Viewer).
Using iMovie to Play Video On Your Own Camera
With your cam connected to the pc via a Firewire cable , you should establish the blue Function activate the left just below the Monitor section of the screen to connect iMovie to your TV camera.
Click on the miniature camera icon on the left to create the change to the DV function and join to the cam.
One other mode to the right is for enhancing movies (the scissors image).
Today you can control your camera by clicking on the five buttons in the bottom of the Screen display.
These buttons will change based on if you’re seeing movie that’s still in the camera (when the Function Switch is set to DV – the camera symbol), or video from the Shelf or Audience (when the Mode Switch is set-to Modify – the scissors symbol).
Rewind – The switch at the far left rewinds to the start of your picture.
Play – The larger switch in the middle you click to start enjoying your movie. This button is also a toggle switch – to cease enjoying the movie, just click again on the Perform option.
Full-Screen – The button just to the right of the big Play button may show the movie as a full screen on your own computer. Push the ESC key to return to the standard Computer Screen region display.
In Change Mode you may also proceed into a certain stage in your movie by simply clicking the blue scrubber pub which is in the bottom of the Monitor display and just above the handle buttons.
When you select a clip, it will likely be displayed in the Screen display, and a playhead, a tiny grey triangle, will appear on the scrubber bar just below the Screen. You then may click and drag the triangular playhead to the right side or the left to move the clip forward or rewind it.
Short cut for Enjoying in Change Mode – as an alternative to simply clicking the Perform button, it is possible to simply press the space bar on your own computer keyboard to perform the video, and press the space bar again to stop the video.
Experiment at this time with the handle buttons along with the playhead/scrubber bar, shifting backwards and forwards between the video clips on your own tape before you get the hang of utilizing the handle buttons, the spacebar as well as the playhead to begin and quit enjoying of the movies.
The key switches in DV Setting for importing video in the cam are, from left to right:
Pause – The button to the right of the Play switch which you click to stop the video from playing at any level. When stopped, you will nevertheless manage to find out the frame of the video clip in the point you paused displayed in the Screen screen.
Stop – The switch 2nd from your left that you simply click on to stop play/rewind/fast forwards of the movie at any given stage.
Fast Forward – The option at the hard right which you click on to swiftly move forward during the movie in your cam.
Perform – The larger button in the middle that you just click to begin playing the video at whatever level you have set with the Rewind and Fastforward buttons. This button also is a toggle-switch – to cease enjoying the movie, simply click again on the Play button.
Transfer – the large switch just above the Play option that you utilize to transfer your video , which we will get to in the next measure.
To shoot a movie – that is to down load a section of the movie you might have in your mini-DV tape onto the computer and save it there – you initially should use the VCR-like control buttons to really go to a place around three seconds prior to the beginning of the movie section you would like to record and quit there.
Today click the big Transfer button just over the Play button to start getting the video at that time.
The movie you’re recording will perform in the Computer Screen place and you will also see an icon representing your captured video clip show up in the Shelf region to the appropriate.
When you have recorded all of the video clip that you need, click the Transfer button again to stop the catch.
Then click the Play button to begin enjoying the movie.
And stop the movie by simply clicking on the Play option (or click the Stop or Pause switches).
After that you can repeat this technique and record another clip using the Play/Rewind/Fast Forward buttons to maneuver to a different segment of your video you want to capture.
Notice: While you’re getting video, in case there exists a a legitimate break in the footage – for example when you quit recording with all the camera off after shooting one picture and flipped record right back on-again to take a fresh landscape – iMovie will automatically carve that video into two clips in the Shelf area.
In a stage several seconds before that video clip, again begin to perform the video then push the Import button. A fresh icon will show up in the Ledge place to the right for this particular second clip which you’ve recorded. Cick on Transfer after which the Play button if you are done capturing this second clip.